Skip to content

Videos

Short videos that show Nomen at work in Lightroom Classic, from your first match to reviewing a batch and keeping Nomen up to date.

Nomen overview

A short tour of Nomen in Lightroom Classic: choose species groups and a country, run Nomen on a photograph, and review the suggested match for a Great Gray Owl. Applied matches are saved as keywords and a caption, so you can find your photographs by common or scientific name.

Transcript

Nomen brings species matching into Lightroom Classic. Start by selecting a photograph in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, select the groups you want to search. For this owl, we use Birds. For a photograph without GPS, choose a country on the Location tab to narrow the search. This photograph was shot in Canada. On Scan options, choose a matching type. Main subject matches the largest or most prominent subject. Choose Full review to inspect the result, then click Run Nomen.

Nomen suggests a species and draws a box around the subject it matched. This owl has a Clear match. Look at the alternatives before deciding what to keep. When you apply a match, the species names are saved as keywords, so you can search by common or scientific name. Nomen can also generate a caption, ready to share. Applying a match saves a caption in Lightroom's Metadata panel and replaces any caption already there. Your photographs and their species details stay together in your Lightroom catalog.

Match an owl with Quick setup

Use Quick setup to describe your shoot in one sentence, then run a match on a Great Gray Owl photograph. Compare the suggested species, the subject box and the alternatives before you apply it.

Transcript

This video shows how to match a photograph with Quick setup. Select your photograph in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. Click Quick setup at the top. Your previous setup appears under Your selection. Keep the choices that still apply. To remove an option that no longer fits, click the x beside its name under Your selection. These are the search options for this run. Finish the sentence with where you were, what you were shooting, and what you saw. Without GPS data, the location needs to be set manually, so tell Nomen where you were. This owl was shot in Canada. You can type it too: birds in Canada adds Birds and Canada. Set My photos show to one main subject. Click the Run Nomen button. Nomen suggests Great Gray Owl, and the card says Clear match. Compare the subject box and the alternatives with your photograph before deciding what to keep. If the match is correct, click Apply to save the species keywords and caption to the photo.

Match an owl with All settings

Choose each option yourself in Nomen's All settings: species groups, a country for photos without GPS, and the scan options. Run it on a Great Gray Owl photograph and review the suggestion before keeping it.

Transcript

This video shows how to match a photograph with All settings, where you choose each option yourself. Select your photograph in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. For this owl, that's Birds. Without GPS data, the location needs to be set manually. This photo was shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject and Full review. Click the Run Nomen button. Nomen suggests Great Gray Owl, and the card says Clear match. Compare the subject box with the bird, and look through the alternatives. Applying a match saves the result you choose, so review the suggestion before keeping it.

Fast: match the whole photograph

The Fast option matches the whole photograph without drawing separate subject boxes, which suits photos where one subject fills the frame. This example uses a Snapping Turtle and checks the suggestion against its alternatives.

Transcript

This video shows the Fast scanning option, which matches the whole photograph without finding separate subject boxes. It's useful when one subject fills the frame. Select the photograph in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. For this turtle, that's Reptiles and Amphibians. This photograph has no GPS data. On the Location tab, I choose Canada to narrow the search to where it was taken. On Scan options, choose Fast and Full review. Click the Run Nomen button. Nomen suggests Snapping Turtle, and the card says Clear match. Compare that suggestion with the whole photograph and look at the alternatives. If the match is satisfactory, click Apply to save the species keywords and caption to the photo.

Every subject: flower and visitor

Use Every subject with Look for flowers too to match an insect and the flower it is visiting in one photograph. Review each suggested match, and untick any subject you don't want to keep.

Transcript

This video shows how to name an insect and the flower it's visiting, in one photograph. Select your photograph in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. Look for flowers too is only available when every species group is selected. So on the Species tab, click All on. Without GPS data, the location needs to be set manually. This photo was shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Every subject and Full review. Then scroll down to Flowers and tick Look for flowers too. Click the Run Nomen button. Here, Nomen finds four subjects representing two unique species. The moth is suggested as Hummingbird Clearwing. Its card says Close call: Graceful Clearwing is close behind. The flower is suggested as wild bergamot, with a Clear match. Compare each subject box with your photograph, and look through the alternatives. Untick Apply this match to leave a subject out. In this example, we only want to keep the moth, so we untick the flower. Keep only the matches you've reviewed and want to save.

Quick review: a selected batch

Quick review shows Nomen's suggested names for a batch of photographs in one grid. Check each card against its photo, untick anything that doesn't fit, and apply only the matches you want.

Transcript

If you have a batch of photos you want to review quickly, use Quick review. It shows the suggested names in one grid. In the Library, open the group of photographs you want to match and select them. For this example, I have filtered the view to five photographs and selected them all. Your selection can be larger or smaller. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. We've picked Birds, Mammals, Reptiles and Amphibians, Moths Large, and Orchids to fit these photos. Without GPS data, the location needs to be set manually. These were shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject, then Quick review. Click the Run Nomen button. Nomen says one photo has no strong match in the groups we chose. Keep Results takes us to the grid. Here, four cards say Clear match, and one asks us to check it: American Beaver. The banner at the top counts the photos to check and says what to try, such as running again with Search All Groups. Check each suggestion against its photo. Obviously this log isn't a beaver, so we untick it and don't keep this match. Apply Checked saves the checked results to your Lightroom catalog.

Results Summary: decide before saving

With Don't review selected, Nomen shows a Results Summary before anything is saved to your catalog. Apply to Catalog is the saving step, and a clear match is still a suggestion to check.

Transcript

This video shows Don't review, which skips the review screens. You still decide before anything is saved. In the Library, select the photographs you want to match. For this example, I have filtered the view to four photographs and selected them all. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. If you're not sure, click All on. For this batch, I am going to choose Mammals, Reptiles and Amphibians, Moths Large, and Orchids. Without GPS data, the location needs to be set manually. These were shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject, then Don't review. Click the Run Nomen button. Here, Nomen reports four photos processed, four matched, and four clear matches. The dialog warns that applying replaces existing captions and clears captions on unmatched photos. Processing alone hasn't saved anything. Apply to Catalog is the saving step. For difficult subjects, use Quick review or Full review so you can inspect the suggestions first. A clear match is still a suggestion, not a guarantee.

Simple survey: inspect species and counts

Simple survey boxes each subject Nomen counts in a photograph and suggests a name for each species, shown here with a flock of geese. The count is a guide for your review, not a scientific count, and it isn't saved to the photo.

Transcript

This video shows Simple survey, which counts the subjects it finds in a photograph and suggests a name for each species. Select the photograph you want to match in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. The All on button selects every species group. For these geese, we choose Birds. Without GPS data, the location needs to be set manually. This photo was shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Simple survey with Full review. Click the Run Nomen button. Nomen reports one species and seven individuals. The blue boxes show what Nomen counted. Check the overlapping birds in the centre, as well as the ones around them. The suggested species is Canada Goose, with alternatives below it. Survey results don't carry a match statement, so check the name yourself. The count is a guide while you review. It isn't accurate enough for scientific counts, and Nomen doesn't save it to your photo.

Choose your own subjects

When a photograph has more than one subject, choose which ones Nomen matches: tick Nomen's numbered boxes or draw your own, up to 8 per photo, each with its own species groups. Here, a bison and a cowbird are matched at once, and a small sparrow gets a box of its own.

Transcript

When a photo has more than one subject, you can choose which ones Nomen matches, up to eight per photo, and give each one its own species groups. In this example, I select two photos: a bison with a cowbird, and a small sparrow beside a log. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, I choose Birds and Mammals. Without GPS data, the location needs to be set manually. These were shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject with Full review. Click the Run Nomen button. If the Search All Groups prompt appears, choose Keep Results. Here, Nomen suggests Brown-headed Cowbird. I want the bison too. Click Not the subjects you wanted. Nomen shows its boxes, numbered. Click a box to tick it. I tick box one, the cowbird, and box two, the bison. Each box can have its own species groups. I choose Mammals for the bison and Birds for the cowbird. Click Match. Nomen matches both boxes at once. Click Skip Photo to go to the second photo without applying changes. Here, Nomen suggests Star-nosed Mole. I want the sparrow. Click Not the subjects you wanted. The sparrow has no box of its own, so click Draw a box, then click two opposite corners around the bird. I leave the other boxes unticked, so only my box is matched. Click Match. Compare each suggestion and its alternatives with your photograph. If the matches are correct, click Apply to save the species keywords and caption to your photos.

Match a photo with GPS

Nomen can use a photograph's GPS data to find the country it was taken in and narrow its suggestions to species recorded in that country. You still compare the suggested match and its alternatives with your photograph before applying it.

Using a province or state to check local rarity

Transcript

This video shows how Nomen uses a photograph's GPS data. Select the photograph you want to match in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. The line at the top says how many of the selected photos have a location. On the Location tab, Auto-detect from photo GPS data is on, so Nomen narrows matching to species recorded in the country where the photo was taken. The countries you tick are used for photos without GPS. On the Species tab, choose the groups you're interested in. If you're not sure, use this button to enable every species group. On Scan options, choose Main subject and Full review. Click the Run Nomen button. Nomen suggests Starvation Prickly-pear, and the card says Clear match. Compare it with your photograph and look at the alternatives before deciding what to keep. If the match is satisfactory, click Apply to save the species keywords and caption to the photo.

Find, caption and share matched photographs

See what Nomen saves when you apply a match: species keywords you can search by common or scientific name, and a caption ready to copy. Then make an ID cut sheet that brings several matched photographs together on one page.

Transcript

This video shows what Nomen saves to your photographs, and how to find and share it. Saved species names make your photographs easier to find. Search Keywords for Snapping Turtle, or use Chelydra serpentina to find the same photograph. Applying a match also writes a caption to the photo, with the species name, camera settings and hashtags. It replaces any caption already there. Here it is in Lightroom's Metadata panel. To copy it for sharing, click the Library menu, go to Plug-in Extras, and choose Generate Nomen Caption. Nomen puts it on your clipboard.

Nomen will generate a cut sheet of matched photos for you. To bring several photographs together, select them in the Library. Click the Library menu, go to Plug-in Extras, and choose Generate ID Cut Sheet. Choose a folder for the page. Nomen opens the cut sheet in your browser. Here, all four photographs have clear matches. The page brings their pictures, common and scientific names, and match statements together.

Update Nomen

Keep Nomen up to date from the Plug-in Manager: update the plug-in, reload it, and check the Species Packs. When Setup offers asset updates, press Update assets, on Mac and Windows.

Transcript

Here's how to keep Nomen up to date in Lightroom Classic. Open the File menu and choose Plug-in Manager. Select Nomen in the list and open Setup. Under Updates, click Update plugin when a new version is available. When the download finishes, click OK. In the Plug-in Author Tools section, click Reload Plug-in.

After reloading, look under Updates in Setup. After a successful check, No updates available means no newer download was found. If asset updates are offered, use Update assets.

Open Species Packs to check the species data. Installed means the data is present. Here, the section also says all up to date. If a newer download is offered, use Update. If the data is missing or incomplete, use Download.

On Windows, use Update assets in Setup when updates are offered. This also keeps the Windows GPU files current.

Longer walkthroughs

These join several of the lessons above into one longer video.

Review results three ways

Three review lessons in one video: Every subject with a flower and its visitor, Quick review for a batch, and the Results Summary.

Transcript

00:00:00.000 — Flower and visitor — moth and wild bergamot

This video shows how to name an insect and the flower it's visiting, in one photograph. Select your photograph in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. Look for flowers too is only available when every species group is selected. So on the Species tab, click All on. Without GPS data, the location needs to be set manually. This photo was shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Every subject and Full review. Then scroll down to Flowers and tick Look for flowers too. Click the Run Nomen button. Here, Nomen finds four subjects representing two unique species. The moth is suggested as Hummingbird Clearwing. Its card says Close call: Graceful Clearwing is close behind. The flower is suggested as wild bergamot, with a Clear match. Compare each subject box with your photograph, and look through the alternatives. Untick Apply this match to leave a subject out. In this example, we only want to keep the moth, so we untick the flower. Keep only the matches you've reviewed and want to save.

00:01:11.133 — Quick review — select your photos

If you have a batch of photos you want to review quickly, use Quick review. It shows the suggested names in one grid. In the Library, open the group of photographs you want to match and select them. For this example, I have filtered the view to five photographs and selected them all. Your selection can be larger or smaller. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. We've picked Birds, Mammals, Reptiles and Amphibians, Moths Large, and Orchids to fit these photos. Without GPS data, the location needs to be set manually. These were shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject, then Quick review. Click the Run Nomen button. Nomen says one photo has no strong match in the groups we chose. Keep Results takes us to the grid. Here, four cards say Clear match, and one asks us to check it: American Beaver. The banner at the top counts the photos to check and says what to try, such as running again with Search All Groups. Check each suggestion against its photo. Obviously this log isn't a beaver, so we untick it and don't keep this match. Apply Checked saves the checked results to your Lightroom catalog.

00:02:30.367 — Results Summary — your selection

This video shows Don't review, which skips the review screens. You still decide before anything is saved. In the Library, select the photographs you want to match. For this example, I have filtered the view to four photographs and selected them all. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. If you're not sure, click All on. For this batch, I am going to choose Mammals, Reptiles and Amphibians, Moths Large, and Orchids. Without GPS data, the location needs to be set manually. These were shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject, then Don't review. Click the Run Nomen button. Here, Nomen reports four photos processed, four matched, and four clear matches. The dialog warns that applying replaces existing captions and clears captions on unmatched photos. Processing alone hasn't saved anything. Apply to Catalog is the saving step. For difficult subjects, use Quick review or Full review so you can inspect the suggestions first. A clear match is still a suggestion, not a guarantee.

Review results and run a survey

Four lessons in one video: Every subject, Quick review, the Results Summary and Simple survey.

Transcript

00:00:00.000 — Flower and visitor — moth and wild bergamot

This video shows how to name an insect and the flower it's visiting, in one photograph. Select your photograph in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. Look for flowers too is only available when every species group is selected. So on the Species tab, click All on. Without GPS data, the location needs to be set manually. This photo was shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Every subject and Full review. Then scroll down to Flowers and tick Look for flowers too. Click the Run Nomen button. Here, Nomen finds four subjects representing two unique species. The moth is suggested as Hummingbird Clearwing. Its card says Close call: Graceful Clearwing is close behind. The flower is suggested as wild bergamot, with a Clear match. Compare each subject box with your photograph, and look through the alternatives. Untick Apply this match to leave a subject out. In this example, we only want to keep the moth, so we untick the flower. Keep only the matches you've reviewed and want to save.

00:01:11.133 — Quick review — select your photos

If you have a batch of photos you want to review quickly, use Quick review. It shows the suggested names in one grid. In the Library, open the group of photographs you want to match and select them. For this example, I have filtered the view to five photographs and selected them all. Your selection can be larger or smaller. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. We've picked Birds, Mammals, Reptiles and Amphibians, Moths Large, and Orchids to fit these photos. Without GPS data, the location needs to be set manually. These were shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject, then Quick review. Click the Run Nomen button. Nomen says one photo has no strong match in the groups we chose. Keep Results takes us to the grid. Here, four cards say Clear match, and one asks us to check it: American Beaver. The banner at the top counts the photos to check and says what to try, such as running again with Search All Groups. Check each suggestion against its photo. Obviously this log isn't a beaver, so we untick it and don't keep this match. Apply Checked saves the checked results to your Lightroom catalog.

00:02:30.367 — Results Summary — your selection

This video shows Don't review, which skips the review screens. You still decide before anything is saved. In the Library, select the photographs you want to match. For this example, I have filtered the view to four photographs and selected them all. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. If you're not sure, click All on. For this batch, I am going to choose Mammals, Reptiles and Amphibians, Moths Large, and Orchids. Without GPS data, the location needs to be set manually. These were shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Main subject, then Don't review. Click the Run Nomen button. Here, Nomen reports four photos processed, four matched, and four clear matches. The dialog warns that applying replaces existing captions and clears captions on unmatched photos. Processing alone hasn't saved anything. Apply to Catalog is the saving step. For difficult subjects, use Quick review or Full review so you can inspect the suggestions first. A clear match is still a suggestion, not a guarantee.

00:03:45.200 — Simple survey — Canada Geese

This video shows Simple survey, which counts the subjects it finds in a photograph and suggests a name for each species. Select the photograph you want to match in the Library. Click the Library menu, go to Plug-in Extras, and choose Run Nomen on Selected Photos. On the Species tab, choose the groups you're interested in. The All on button selects every species group. For these geese, we choose Birds. Without GPS data, the location needs to be set manually. This photo was shot in Canada, so on the Location tab, we choose Canada. On Scan options, choose Simple survey with Full review. Click the Run Nomen button. Nomen reports one species and seven individuals. The blue boxes show what Nomen counted. Check the overlapping birds in the centre, as well as the ones around them. The suggested species is Canada Goose, with alternatives below it. Survey results don't carry a match statement, so check the name yourself. The count is a guide while you review. It isn't accurate enough for scientific counts, and Nomen doesn't save it to your photo.